Product Introduction
It is a coil mounted nail made of Q195 and Q235 low carbon steel as the substrate, with a zinc layer formed by electroplating process. The nail cap size is smaller than that of conventional large cap coil nails, with a nail body diameter of 2.1-3.3mm and a length of 25-100mm. It has various types such as bare body and ring pattern, and is mostly 15 ° spot welded coil mounted. Compatible with conventional CN series nail guns, with a compact structural design, it is suitable for fastening scenarios that require nail cap concealment.
Product Advantage
1. Basic anti-corrosion and clean appearance: The electroplated zinc layer is smooth and free of burrs, which can resist indoor moisture and slight water vapor erosion. Some products using trivalent environmentally friendly zinc have a coating of ≥ 6um, and there is no red rust after 200 hours of salt spray testing, and there is no problem of coating detachment or dirt. It is suitable for scenarios with basic appearance requirements.
2. Flexible operation without damaging materials: The small cap design will not expose too much and affect the appearance of the workpiece, and can also reduce the pressure on thin wooden boards and sheets. Paired with sharp nail tips such as diamond tips, it has strong penetration and is not easy to cause workpiece cracking, with high operational tolerance.
3. Efficient adaptation with controllable costs: The roll design is compatible with the nail gun, allowing for continuous operation without sticking nails, greatly improving efficiency; The electroplating process is mature, with lower production costs compared to stainless steel coil nails. The low-carbon steel substrate ensures the strength of the nail body, is not easily bent, and has a high cost-effectiveness.
4. Diverse specifications and wide adaptability: There are multiple options for nail length, nail body pattern and other specifications, which can adapt to the fine fixation of small decorative parts and meet the fastening needs of ordinary wooden structures without the need for special tools, making it highly versatile.
Technical Parameters
Product Uses
1. Furniture and home decoration: Suitable for fixing backboards and assembling drawer frames of panel furniture such as cabinets and wardrobes. It can also be used for auxiliary fastening of indoor ceiling corners and lightweight partition boards. The small cap does not affect the subsequent decoration aesthetics.
2. In the field of light industry packaging, it is commonly used for assembling small wooden packaging boxes and gift boxes, as well as fixing paper pallets and lightweight bamboo products. It can avoid damage to packaging materials due to large nail caps, while ensuring stable packaging structure.
3. Indoor architecture and woodworking: It can be used for auxiliary fixation of indoor wooden floors, installation of wooden skirting boards, and is also suitable for lightweight wooden structure splicing of materials such as cork and plywood. It is also suitable for fine scenes such as furniture maintenance and wooden handicraft production.
